What is solo on a mixer?

Author: Prof. Delmer Turcotte  |  Last update: Saturday, November 20, 2021

At its core, the solo button on a mixer channel allows you to quickly audition a signal all by itself, or with a group of other solo enabled channels, without needing to mute all of the channels that you don't want to hear. ... Then, to return your mixer to its normal monitoring mode, turn off all the solo buttons.

What is a solo in audio?

Solo, more correctly known as Solo-in-Place (SIP), is an after-fade listen taken from after the pan control as well as the channel fader. It is therefore a stereo signal even on mono channels. The idea is to allow the monitoring of a channel signal when panned to its appropriate position in the stereo image.

What is the difference between Mute and Solo?

Solo Doesn't Necessarily Mean Single

If it wasn't just made clear, the solo button doesn't just let you hone in on one track but a selection or group of tracks. Conversely, muting will temporarily cut the sound from whichever track or group of tracks you don't want to hear when mixing.

What does AFL solo stand for?

SIP and AFL

SIP stands for solo in place and is also known as stereo AFL (After-Fade Listen). Solo in place is more commonly used for recording applications and taps the audio signal after the channel fader, EQ and pan controls.

What does AFL stand for on a mixer?

AFL (after fade listen) is used in mixing boards to override the normal monitoring path in order to monitor a specific signal at a predefined point in the mixer.

AFL, PFL and SIP... What do these solo modes mean?

What is Solo X32?

The X32 RACK allows you to monitor audio sources on a set of headphones or monitor speakers when operating the console from a front-of-house position. ... This will output the main LR pre-fader signal to the monitors when no Solo button is selected on any of the channels or buses.

What does solo safe do?

So, to safeguard these tracks the best designed mixers have a function called solo-safe which allows you to disable the track mute action for those channels in solo-safe mode. ... On a mixer with canceling solo pressing a solo button turns it on and pressing another solo button turns the last solo button off.

How do I enable solo safe?

Solo Safe is achieved by Command - clicking (Control - click on a PC) on the track's solo button. When in this state the safe track won't be subject to any implied mutes and will continue to pass audio. Watch the free video to see two basic examples of when this might be useful.

What does solo mean on garage band?

You can solo a track, silencing all tracks that are not also soloed. Soloing tracks is useful when you want to work on a track individually, or work on a few tracks, without hearing the other tracks in the project.

What does rude solo mean on a mixer?

According to Mackie manual, it is a reminder to the operator that what you're hearing in the control room is(are) the solo channel(s) you have selected. That's why they named it “Rude Solo”, it is rude reminder, in case you forgot that you have soloed one or more channels.

What is the phantom button on a mixer?

Phantom power is used with condenser microphones. It is called phantom power because there is no obvious external power supply for the condenser mic; the power supply is invisible and therefore a "phantom." The mixer sends voltage up the same wires that the audio is traveling down.

What is St in Yamaha mixer?

See that red button labeled “ST”? When pressed, it assigns (connects) the input channel to the L/R stereo bus and master fader. You can then use the pan control to position the sound from left to right.

What does solo isolate mean?

But some people might want the converse. If you solo isolate the audio tracks then one click on the subgroup master solo button allows you to hear only the audio of that submix.

How do I turn off solo safe?

A red slash across the Solo button indicates that the channel strip is solo-safe. When you solo another channel strip, the channel strip no longer mutes. Control-click again to deactivate the channel strip's solo-safe state.

How do I change solo mode in Pro Tools?

How to use Solo Modes in Pro Tools
  1. How to use Solo Modes in Pro Tools.
  2. In order to switch the solo mode, click on the top menu bar: Options -> Solo Modes:
  3. Click on the AFL solo mode to switch to this mode:

What is the difference between PFL and AFL?

The labels may vary, but the difference is important. AFL stands for After-Fade Listen while PFL stands for Pre-Fade Listen. Depending on the current state of your console, pressing solo in either mode may result in the same thing. Or it may be completely different.

What is a PFL button?

PFL is an abbreviation for “Pre Fader Listen” (or “Pre Fader Level”), and it's a feature found on most mixing consoles designed for live sound. You'll usually find a PFL button located near the fader of every input channel.

What is a PFP?

PFP is an acronym in texting and social media. It means both picture for proof and profile pic.

Previous article
Has Jeep been sold?
Next article
Who sacked Alexandria?